T&S BRASS B-0680-ST
BEDPAN WASHER MIXING FAUCET LOOSE KEY STOPS VAC
SKU: TSB-0680-ST
Condition: NEW
for exact fit and function.
A faucet or a tap (also spigot) is a valve controlling the release of a liquid or gas. Turning a valve knob or lever adjusts flow by varying the aperture of the control device in the valve assembly. The result when opened in any degree is a choked flow. Its rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting.
A key is a small, shaped metal implement for operating a switch in the form of a lock. A key may similarly be a pin, bolt, or wedge inserted between other pieces, or fitting into a hole or space designed for it, so as to lock parts together. It may have incisions cut to fit the wards of a particular lock, which is inserted into a lock and turned to open or close it.
A pan is any device used as a container or a collector. A pan may refer to a shallow cooking implement used on a burner or in an oven or it may refer to a similar collecting implement used to capture water, condensation, grease, shortening, and other drainage. A pan may also be used to contain processed food items such as meat, fruit and vegetables, and crumbs as they exit a mincer, slicer, or dicer.
A stop is a part designed to restrict the movement of a rotary mechanism, linear (sliding) mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. A stop or stopper may also be designed to calibrate and halt the flow of solids, liquids or gases.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
T&S products are highly acclaimed throughout the industry for being well-built, long-lasting and reliable. Rigorous testing and a focus on interchangeability have helped set T&S apart from the competition for nearly 70 years.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: TS