Randell RF CNT0505
PROBE DIXELL NTC DEFROST & FAN RELAY W/
SKU: RDRFCNT0505
Condition: NEW
The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer: For every 6, 8, 10, 12 or 24 hours of compressor operation it turns on a defrost heater for 15 minutes to half an hour.
A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time.
Fans are used in restaurant equipment for a variety of purposes, including ventilation, cooling, and air circulation. In kitchen equipment, fans are used to ventilate cooking areas, remove smoke and odors, and maintain a consistent temperature. Fans are also used in refrigeration equipment, such as refrigerators and freezers, to circulate air and maintain a consistent temperature throughout the appliance.
There are several types of fans that can be used in restaurant equipment, including axial fans, centrifugal fans, and blowers. Axial fans are used to move air in a linear direction, and are commonly used in ventilation systems and cooling equipment. Centrifugal fans are used to move air in a circular direction, and are often used in refrigeration equipment and air conditioning systems. Blowers are used to move air at high pressures and are commonly used in ovens and other cooking equipment to provide the force needed to circulate hot air.
Fans are an important component of many types of restaurant equipment, and are used to ensure the safe and efficient operation of the equipment, as well as the quality and safety of the food being prepared.
There are many types of probes used in restaurant equipment for the measurement of temperature, humidity, liquid level, ice level, product or ingredient levels and other critical operating limits and control points (HACCP). A probe is a small device, especially an electrode, used for measuring, testing, or sensing and obtaining information. Probes are commonly thin and oblong, and may be flexible. They provide data output to other components to control operation of the equipment.
Relays are electrical devices that are used to control circuits in restaurant equipment and other types of machinery. They work by using a small electrical current to control a larger current, allowing a low-power control circuit to switch a high-power circuit on or off.
In restaurant equipment, relays can be used to control a variety of functions, such as turning on and off motors, controlling heating elements, and activating alarms. For example, a relay might be used to turn on a refrigerator's compressor when the temperature inside the fridge reaches a certain level, or to turn off a stove's heating element when the temperature reaches a certain point. Relays are often used in restaurant equipment because they can handle large amounts of current and are able to switch circuits on and off quickly and reliably.
Randell’s exclusive commercial refrigeration design elements ensure consistent food quality and safety, reduce wear, and make cleaning and maintenance quick and simple. For more than 35 years, Randell has been the professional standard in commercial refrigeration equipment across the country. Designed to take on the toughest cooling challenges, Randell offers a range of innovative solutions for the ever-changing foodservice industry, from their patented FX Series precision refrigeration line to their assortment of prep table solutions, refrigerated chef stands, blast chillers and more.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: RD
Width: 3.85 in (9.78 cm)
Height: 2.0 in (5.08 cm)
Length: 7.55 in (19.18 cm)
Unit of Measure: Each (EA)