Garland G02247-1-8
BEARING STOP WASHER
SKU: GLG02247-1-8
Condition: NEW
Bearings are widely used in restaurant equipment. They limit motion and reduce friction between moving parts. A bearing may provide for free linear or rotational movement of the part. Bearings are classified broadly according to the type of operation, the motion allowed, or to the direction of the load applied to the parts.
A stop is a part designed to restrict the movement of a rotary mechanism, linear (sliding) mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. A stop or stopper may also be designed to calibrate and halt the flow of solids, liquids or gases.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
The Garland Group manufactures premium professional cooking appliances for the foodservice industry. Garland heritage dates back to the 1920’s, and the Detroit-Michigan Stove Company. Cooking has come a long way since then, and so has Garland. Today’s innovations are all about cost-saving efficiency, and authoritative response to the ever-changing needs of foodservice operators. Small-footprint venues and expanding menus have created a demand for inventive equipment solutions that make high-volume cooking faster, safer, and more economical.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: GL
Width: 1.0 in (2.54 cm)
Height: 0.1 in (0.25 cm)
Length: 1.05 in (2.67 cm)
Unit of Measure: Each (EA)