Convotherm C6015240
WASHER CABLE BUSHING BURNER IN
SKU: COVC6015240
Condition: NEW
There are several types of burners that are used in restaurant equipment, including gas burners, electric burners, and induction burners. Gas burners are fueled by natural gas or propane and are commonly used in stoves, ovens, and grills. Electric burners are powered by electricity and are used in a variety of cooking equipment, including countertop griddles, woks, and induction cookers. Induction burners use electromagnetic fields to heat cooking vessels and are known for their energy efficiency and fast heating times.
An infrared burner works by focusing the flame of a standard gas burner onto a ceramic tile that has thousands of microscopic holes in it. This converts the heat of the flame into infrared energy.
Burners are an essential component of many types of restaurant equipment and are used to prepare a wide range of dishes, from simple sandwiches to complex multi-course meals.
A bushing is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. Common designs include solid (sleeve and flanged), split, and clenched bushings.
Cables of many forms are pervasive in foodservice equipment. A cable is a wire or grouping of wires usually insulated and held together within an overall sheath. The assembly is used for the transmission of electrical power or electrical signals to and from various components within a piece of equipment. Cables may be housed internally such as with ribbon cables, or may be external such as with power cords. An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric current.
A cable assembly is the composition of one or more electrical cables and their corresponding connectors. A cable assembly is not necessarily suitable for connecting two devices but can be a partial product (e.g. to be soldered onto a printed circuit board with a connector mounted to the housing). Cable assemblies can also take the form of a cable tree or cable harness, used to connect many terminals together.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Width: 0.5 in (1.27 cm)
Height: 0.45 in (1.14 cm)
Length: 1.4 in (3.56 cm)
Unit of Measure: Each (EA)