Convotherm 6015238
SCREWING CABLE BUSHING BURNER
SKU: COV6015238
Condition: NEW
There are several types of burners that are used in restaurant equipment, including gas burners, electric burners, and induction burners. Gas burners are fueled by natural gas or propane and are commonly used in stoves, ovens, and grills. Electric burners are powered by electricity and are used in a variety of cooking equipment, including countertop griddles, woks, and induction cookers. Induction burners use electromagnetic fields to heat cooking vessels and are known for their energy efficiency and fast heating times.
An infrared burner works by focusing the flame of a standard gas burner onto a ceramic tile that has thousands of microscopic holes in it. This converts the heat of the flame into infrared energy.
Burners are an essential component of many types of restaurant equipment and are used to prepare a wide range of dishes, from simple sandwiches to complex multi-course meals.
A bushing is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. Common designs include solid (sleeve and flanged), split, and clenched bushings.
Cables of many forms are pervasive in foodservice equipment. A cable is a wire or grouping of wires usually insulated and held together within an overall sheath. The assembly is used for the transmission of electrical power or electrical signals to and from various components within a piece of equipment. Cables may be housed internally such as with ribbon cables, or may be external such as with power cords. An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric current.
A cable assembly is the composition of one or more electrical cables and their corresponding connectors. A cable assembly is not necessarily suitable for connecting two devices but can be a partial product (e.g. to be soldered onto a printed circuit board with a connector mounted to the housing). Cable assemblies can also take the form of a cable tree or cable harness, used to connect many terminals together.
A screw is a type of fastener, in some ways similar to a bolt typically made of metal, and characterized by a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material that may help pull fastened materials together and prevent pull-out.
A screw drive is a system used to turn a screw. At a minimum, it is a set of shaped cavities and protrusions on the screw head that allows torque to be applied to it. Usually, it also involves a mating tool, such as a screwdriver, that is used to turn it. Other examples include Phillips head screws and screwdrivers, and Allen hex screws and wrenches.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Width: 0.7 in (1.78 cm)
Height: 0.65 in (1.65 cm)
Length: 0.8 in (2.03 cm)
Unit of Measure: Each (EA)