Convotherm 6015210
WASHER FOR MOTOR SHAFT SEAL P3
SKU: COV6015210
Condition: NEW
Motors are used in all kinds of foodservice equipment to power beaters, blenders, slicers, basket lifts, filters, fans and much more. A motor converts one form of energy into mechanical energy. General-purpose motor designs with standard dimensions and characteristics provide convenient mechanical power for foodservice equipment once customized to the exact OEM specifications (RPM, torque, magnet dimension, winding, etc.).
Different types of motors are used in restaurant equipment, including AC motors, DC motors, and stepper motors. AC motors are used to power equipment that requires high torque, such as mixers, grinders and ice machines. DC motors are used in equipment that requires precise control, such as conveyor belts and automated food prep machines. Stepper motors are used in equipment that requires precise positioning, such as robot arms and automated food dispensers.
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a pump system), maintaining temperature, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets or o-rings.
A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power. The various members such as pulleys and gears are mounted on it.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Width: 3.25 in (8.26 cm)
Height: 1.15 in (2.92 cm)
Length: 5.15 in (13.08 cm)
Unit of Measure: Each (EA)