Cma Dish Machines 13509.12
ROCKER SHAFT BEARING
SKU: CMA13509.12
Condition: NEW
Bearings are widely used in restaurant equipment. They limit motion and reduce friction between moving parts. A bearing may provide for free linear or rotational movement of the part. Bearings are classified broadly according to the type of operation, the motion allowed, or to the direction of the load applied to the parts.
A rocker switch or seesaw switch is an on/off switch that rocks (rather than trips) when pressed. One side of the switch is raised while the other side is depressed much like a rocking horse or seesaw. A rocker switch may have a circle (for "on") and a horizontal dash or line (for "off") on either end to indicate whether a device is on or off.
A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power. The various members such as pulleys and gears are mounted on it.
CMA began in a small building of 2500 square feet of manufacturing area in Westminster, California and today they build commercial warewashing equipment in a 100,000 square feet manufacturing area. CMA has always strived to be at the leading edge by offering reliable service, creative ideas, innovative designs and quality equipment. Today CMA produces both High-temperature and Low-temperature chemical sanitizing Dishmachines, Glasswashers and Warewashing equipment in Garden Grove, California.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: CMA
Width: 1.0 in (2.54 cm)
Height: 1.0 in (2.54 cm)
Length: 3.85 in (9.78 cm)
Unit of Measure: Each (EA)