Cma Dish Machines 02101.70
UC 50 HUB ROTOR/PIPE COUPLING
SKU: CMA02101.70
Condition: NEW
A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join two pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.
Alternatively, in plumbing or with tubing a coupling connects two pipes. If their sizes differ, the fitting is known as a reducing coupling, reducer, or an adapter. There are two types of couplings: "regular" and "slip". A regular coupling has a small ridge or stop internally, to prevent over-insertion of a pipe, and thus under-insertion of the other pipe segment (which would result in an unreliable connection). A slip coupling (sometimes also called a repair coupling) is deliberately made without this internal stop, to allow it to be slipped into place in tight locations, such as the repair of a pipe that has a small leak due to corrosion or freeze bursting, or which had to be cut temporarily for some reason.
Hubs are used to transmit mechanical power from a drive motor by coupling it to an output device such as a wheel or an arm. Hubs are generally centered joining points and may be implemented singularly or in tandem operation.
In an electric motor, the moving part is the rotor, which turns the shaft to deliver the mechanical power. The rotor usually has conductors laid into it that carry currents, which interact with the magnetic field of the stator to generate the forces that turn the shaft. Alternatively, some rotors carry permanent magnets, and the stator holds the conductors.
CMA began in a small building of 2500 square feet of manufacturing area in Westminster, California and today they build commercial warewashing equipment in a 100,000 square feet manufacturing area. CMA has always strived to be at the leading edge by offering reliable service, creative ideas, innovative designs and quality equipment. Today CMA produces both High-temperature and Low-temperature chemical sanitizing Dishmachines, Glasswashers and Warewashing equipment in Garden Grove, California.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: CMA
Width: 0.85 in (2.16 cm)
Height: 0.75 in (1.91 cm)
Length: 1.1 in (2.79 cm)
Unit of Measure: Each (EA)