Amana Menumaster 10903002
WASHER-SPUR GEAR
SKU: AMA10903002
Condition: NEW
A gear or cogwheel is a rotating machine part having cut teeth or, in the case of a cogwheel, inserted teeth (called cogs), which mesh with another toothed part to transmit torque. Geared devices can change the speed, torque, and direction of a power source. Gears almost always produce a change in torque, creating a mechanical advantage, through their gear ratio, and thus may be considered a simple machine. The teeth on the two meshing gears all have the same shape. Two or more meshing gears, working in a sequence, are called a gear train or a transmission. A gear can mesh with a linear toothed part, called a rack, producing translation instead of rotation.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
XpressChef™ high-speed ovens, as well as Amana® Commercial and Menumaster® Commercial specialty, steam and microwave ovens have been ranked best in class for over twenty-five years, and are preferred in areas of performance, reliability, service, construction, ease-of-use and safety. Each is designed, engineered, fabricated and assembled in the USA by the only US based manufacturer of both commercial high speed and microwave ovens.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: AMA
Width: 2.95 in (7.49 cm)
Height: 0.65 in (1.65 cm)
Length: 3.0 in (7.62 cm)
Unit of Measure: Each (EA)