Frymaster 8074936
MICROSWITCH GOLD SEALED LEVER
SKU: FM8074936
Condition: NEW
Levers are often used with foodservice equipment. For example, a lever is commonly found in beverage, condiment, and ice dispensing equipment where it is used to activate product flow. Coffee urns may use a lever to dispense coffee or hot water for tea. Most soda fountains use levers to dispense soda or other carbonated beverages. The lever is typically located on the front of the fountain and is pressed down to release the beverage into the cup. Two the simplest types of levers used in restaurants are a bottle or can opener which serve to pry off a cap, or punch a hole in a lid.
A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force, through the use of a tipping-point mechanism, sometimes called an "over-center" mechanism.
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a pump system), maintaining temperature, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets or o-rings.
In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. Switches of all types are used in the operation of restaurant equipment. The most common type of switch is an electro-mechanical device consisting of one or more sets of movable electrical contacts connected to external circuits. When a pair of contacts is touching, current can pass between them, while when the contacts are separated no current can flow.
Frymaster is globally recognized as a leading provider of frying systems, pasta cookers and water-bath rethermalizers for commercial and institutional kitchens. Frymaster has led the industry in building feature-rich, dependable commercial deep fryers. The company pioneered technologies ranging from the open fry pot to programmable controls.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: FM
Width: 1.85 in (4.7 cm)
Height: 1.6 in (4.06 cm)
Length: 4.2 in (10.67 cm)
Unit of Measure: Each (EA)